Features
● Display 4000 counts
● Jaw Opening Ф40mm/1.6″
● Auto & Manual Ranging
● Auto Power Off
● Diode Open Voltage 2.8V
● Continuity Buzzer <50±20Ω
● Relative Measurement
● Data Hold
● Low Battery Display
● Display Backlight
● Work Light
● Bar Graph
● True Root Mean Square
د.إ283
CompareMastech Clamp Meter MS 2138R
This is Mastech True RMS Clamp Meter with Frequency and Capacitance Measurement. The True RMS vale gives you a more accurate reading than the simple sampling Clamp meters, you will get high resolution and stable reading for each effort to test.
|
Specifications |
Range |
Resolution |
Accuracy |
| DC Voltage | 400mV | 0.1mV | ±(1.0%+2) |
| 4V/40V/400V | 0.001V/0.01V/0.1V | ±(0.7%+2) | |
| 600V | 1V | ±(0.8%+2) | |
| AC Voltage | 400mV/4V/40V/400V | 0.0001V/0.001V/0.01V/0.1V | ±(0.8%+3) |
| 600V | 1V | ±(1.0%+4) | |
| DC Current | 40A/400A/1000A | 0.01A/0.1A/1A | ±(3.0%+6) |
| AC Current | 40A/400A/1000A | 0.01A/0.1A/1A | ±(2.5%+6) |
| Resistance | 400Ω/4kΩ/40kΩ/400kΩ | 0.1Ω/0.001kΩ/0.01kΩ/0.1kΩ | ±(0.8%+3) |
| 4MΩ/40MΩ | 0.001MkΩ/0.1MΩ | ±(1.2%+3) | |
| Capacitance | 40nF/400nF/4μF | 0.01nF/0.1nF/0.001μF | ±(4.0%+5) |
| 40μF/400μF/4000μF | 0.01μF/0.1μF/1μF | ±(4.0%+5) | |
| Frequency (A) | 100Hz/1kHz | 0.01Hz/0.1Hz | ±(1.5%+5) |
| >1kHz | 0.001kHz | Reference | |
| Frequency (V) | 100Hz/1kHz/10kHz | 0.01Hz/0.1Hz/0.001kHz | ±(1.5%+5) |
| >10kHz | 0.01kHz | Reference | |
| Frequency | 10Hz/100Hz/1kHz/10kHz | 0.001Hz/0.01Hz/0.1Hz/1Hz | ±(0.5%+2) |
| (Hz/Duty) | 100kHz/1MHz/10MHz | 0.01kHz/0.1kHz/0.001MHz | ±(0.5%+2) |
| Duty Cycle | 0.1%~99% | 0.10% | ±3.0% |
Advance features :
-Wide response band width.
-Large LCD display.
-Audible sound during continuity check.
-Non-contact AC voltage signal strength with audible and visible indication.
-Single probe test ‘SPT’ to identify ‘Live / Hot’ wire in AC circuit with audible sound and visible indication.
-Air-Cored Coil Sensor
-Software calibrated.
There are no reviews yet.